Danalock

• My Danalock V3 does not rotate

  Follow these instructions if your Danalock V3 does not rotate when unlocking. These steps can be performed outside the door if you are locked out. Open the Danalock app and log in with your user profile. Enable End-to-end operation under "Settings" in the Danalock app. This ensures that the lock fully rotates. Tap "Calibration" and follow the steps in the Danalock app: Set thFew readers

• How do I factory reset Danalock V3?

  It may be necessary to reset the Danalock to factory settings if the lock is being sold, you are moving, or someone else needs to manage the lock. You can easily do this through the Danalock and Unloc apps. Step 1: Log in with your user profile in the Danalock app. Select the lock you want to reset and then click on "Menu." Step 2: Select "Delete device" at the bottom of the list – confirm by pressing "Ok." (https://storage.crisp.chat/users/helpdesk/website/a4f3bb8f4a123800/danalock-app-slFew readers

• How do I replace batteries on Danalock V3?

  You can check the battery level for the Danalock in the Danalock app. The battery life varies depending on usage but typically lasts for about one year. (https://downloads.intercomcdn.com/i/o/373430228/1cc40ca77fe66e75ab9d9088/Skjermbilde+2021-08-09+kl.+13.19.47.png?expires=1725956100&signature=64a2a442ccf16386fc53a2fd3370487196f9475fa6dda4a42e70254dc54c55fa&req=dyckEsp%2Bn4NXFb4f3Few readers

• Connect Danalock to Unloc

  Danalock must be calibrated in the Danalock app before it can be registered in the Unloc app. After calibration is completed, you will only need the Unloc app for daily use. Make sure the Danalock is installed correctly before setting it up in the app. You can read more about installation here. If you have already set up the lock in the Danalock app (and just want to connect it to Unloc), you can skip to Step 9. Step 1: Download the Danalock app. (https://storage.crisp.chat/users/helpdeskFew readers

• How do I update my Danalock to latest firmware?

  Updating Danalock Firmware Danalock requires regular updates – this can easily be done through the Danalock app. Make sure you are near your Danalock before starting the update. Open the Danalock app. Select the lock you want to update and go to Settings. If an update is available, it will be listed under "Firmware". Do not close the app while the system update is downloading or while the lock is updating. (https://storage.crisp.chat/users/helpdesk/website/a4f3bb8f4a123800/img249Few readers

• How do I activate autolock with Danalock V3 and Unloc?

  With Danalock’s automatic locking feature, the door will automatically lock after a set number of seconds. This feature must be configured and managed in the Danalock app. How to enable auto-lock: Make sure you are near your Danalock. Open the Danalock app, select the lock you want to set up, and go to Settings (see image with red circle). In the menu, select "Auto lock" and choose the delay time before the door locks automatically. For example, if you set it to 10 seconds, the door wFew readers

• What is Danalock V3?

  Danalock is a solid digital lock which can easily be mounted on the innside of your door. Since Unloc supports Danalock anyone with a Danalock can use the Unloc app - to easily open doors and share keys. The advantage of using Unloc is that you can share both permanent and temporary keys. Permanent to close friends and family. Temporary to craftsmen who need access mid-day and neighbours who are going to water the plants while you’re on vacation.  In addition Unloc is an open platform, meFew readers

• Installation of Danalock V3 SCANDI on private doors

  The installation of the Danalock V3 depends on which locking mechanism you have on your door. Danalock is designed to be compatible with all doors, but installation may vary. The SCANDI mechanism is the most common in Scandinavia, and if you have purchased a Danalock V3 SCANDI, the user guide in the box will be about the SCANDI-version. You can download the user guide from Danalock by clicking here (aFew readers

• Danalock V3 End to End operation

  The “End-to-End Operation” feature is designed for door locks where turning the key from the outside doesn’t move the thumb turn or Danalock on the inside. In these cases, using the key to unlock the door won’t update the Danalock’s status. By enabling this feature and calibrating the lock, the Danalock ensures it operates in the correct direction (lock or unlock) every time, regardless of the current lock status. Whenever you unlock using the app or Danapad, the lock automatically resets to thFew readers

Masterlock

• How to change the battery of Masterlock Lockbox?

  Few readers

Dormakaba dKey

• How do I replace batteries on Dormakaba dKey?

  For the dKey the battery latch is located on top of the short-end of the lock. Simply unscrew the latct. Replace the battery. Note that the battery should be inserted with the + pole facing outwards. Tighten the latchFew readers

Nimly

• How to install Nimly Touch Pro/Touch/Code/Indoor?

  Few readers

Heimgard

This section contains no articles.

• Connect Stansefabrikken to the Unloc app

  Stansefabrikken's Advance-series Mailboxes with support for IDBOX IQ can be easily connected to the Unloc app. The mailboxes must be set up in the IDBOX IQ app before they can be registered with Unloc. After the registration is completed, there is no need to use the IDBOX app. Step 1: Download the IDBOX IQ app on your mobile phone. Step 2: Create a user profile in the IDBOX app by clicking on "Register now" at the bottom of the screen. Use the same phone number in the IDBOX and UnlocFew readers