Follow this guide to install and onboard Danalocks to a project in Unloc Control Center.

1. “Objective”

The document contains information necessary to perform a installation of a danalock universal module and onboard the module to the Unloc platform this includes the vendor specific app and the use of the Unloc installer app

1.2. Danalock app

The Danalock app is what we call a vendor specific app and is used only during onboarding of the universal module to the Danalock platform which Unloc will interact with in the background. The end user will never interact with the Danalock app for locks owned by a lock holder.

2. Installation

2.1 Hardware installation

The hardware installation will differ between installations but this example is for a self contained intercom system with switching outside. The updated manual from Danalock can be found (here)

Black and Brown wires should always be cut off and not be used in any installation when using with Unloc

In this example we'll be using a Fermax cityline intercom system as the system we will connect the module to. As seen in the connection diagram the module needs to be connected to a stable power source and a relay across the opening input in this case the common and negative terminal is shared.

![

](https://storage.crisp.chat/users/helpdesk/website/-/a/4/f/3/a4f3bb8f4a123800/skjermbilde-2026-01-23-kl-1048_hrdq0g.png)

Connect Danalock to Unloc

1. Log in to Unloc Control Center and click Installer Tool in the top right Corner.
2. Find the project you want to install the locks on.
3. Press Install locks.
4. Choose Danalock and then Start installation.
5. Press either one existing account if the project has one, or choose "Onboard new Danalock Account".
6. If you chose an existing account press "Install more locks".
7. If you are onboarding a new account choose "Let Unloc create a new Danalock account for you."
8. Add display name for the lock connection.
9. Press start onbarding new locks.
10. Copy username and password and log in to the Danalock app.
11. Follow the steps as showed in Unloc Control Center and press next.
12. Press Import locks.

You should be all done and the locks should appear under "Locks" on the left hand in Unloc Control Center.

Updated on: 23/01/2026